aluminium wire 0.05mm-0.95mm with high quality
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 20000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aluminum wire
1.5052,5154 aluminum alloy wire
2.TS:250mpa-320mpa
3.Hard
4.Size:1.0mm---6..5mm
Marketing series:5154,5052,5050,5056
In common ,5154 ,5052 aluminium wire are widy used as fence ,rivit ,nail,zipper,construction material
We can do special for you according to your request.
Apply to
1) Aircraft, transport vehicles, vessels, instruments, metal products
2) Processing to the rivets, Zipper, nails, etc
3 Welding Aluminum Magnesium alloy wire which magnesium content is exceeding 3%
4) Sanitary equipment hose braiding materials, automotive and machinery oil hose material
5) Electronic industries and telecommunications industries
6) Textile shield for power cable
specification:5050/5052 0.12--8mm
5154 0.12--7mm
5056 1.20--8mm
Copper, Aluminum, CCA, CCAM performance parameters reference table
parameter performance name | Tensile strength (Mpa) | Mainstream resistivity (Ωmm2 / m) | Elongation (%) | Density (g/mm3) | Heat (AJ/Kg°C) |
Copper | 205-270 | ≤0.018 | 15~20 | 8.90 | 0.39 * 103 |
aluminum | 100-125 | ≤0.0285 | 8-15% | 2.70 | 0.88 * 103 |
CCA | 120-140 | ≤0.0268 | 15-25% | 3.63 | 0.79 * 103 |
CCAM | 160-350 | ≤0.0245 | 10-20% | 2.85 |
- Q:Copper wire, aluminum wire around the city spiral, you can use when the antenna? Why? Can antennas only be wires? What are their characteristics?
- Antenna materials generally require less resistance, easy processing molding. Copper wire, aluminum wire resistance is smaller, good ductility, is to do more ideal antenna material.
- Q:How to properly install fuse
- If the installation and use of improper, or thickening fuse, or even replaced by aluminum wire, it can not play a protective role, so that buried the accident potential. The correct way to install fuse is: (1) the fixing fuse shall be flat shim. (2) the end of the fuse head should be aligned with the direction of rotation of the screw, and the end of the fuse does not overlap.
- Q:There is a small hole in the stainless steel pan. Can you mend it?
- If there is a small hole and stainless steel utensils are not willing to discard, then you can put a piece of vessels to specialize in stainless steel anti-theft window and door workshop (stores), please master "welding method of argon arc welding in the small hole, can make a more polished up after a good, general it is up to one or two yuan of money, will not exceed a maximum of 10 yuan. Such welding repair, that is, with stainless steel wire repair, and the original material is basically the same, so it is not afraid of burning, and the effect is very good.
- Q:There are several aluminum wires in the high voltage 50mm aluminum cable
- High voltage 50mm - aluminum cable has several pieces of aluminum wire? Aluminum conductor cable belongs to the third stranded circular conductor, the implementation of standards is GB / T 3956-2008 "cable conductor", the standard minimum line 50 square mm aluminum conductor (Lv Si) root numbers of 19. So the high pressure 50mm - aluminum core cable inside each aluminum conductor of not less than 19 of aluminum wire.
- Q:Which heat transfer is copper wire, wire or aluminum wire fast?
- The thermal conductivity of brass is 92.8 W/ (M2 * K); the thermal conductivity of aluminum is 203 W/ (M2 = K); the heat conductivity of mild steel is 46.4 W/ (M2 ? K)Therefore, the heat transfer speed: aluminum wire > copper wire > iron wire
- Q:What is the material of the toilet with aluminium drawing effect?
- The disadvantage is easy to scratch time, a long fading may be easy to issue, not recommended.
- Q:The bottom of the cooker is leaking. How can it be repaired?
- This approach can usually take some time.Other fixes are unreliable.
- Q:How to understand the size of bonsai, the size of the corresponding use of aluminum wire thickness?
- There is no uniform standard for bonsai landscaping. The wire made of bonsai is related to the size of the trunk of the potted bonsai
- Q:While wearing a mask, a halitus how to not let the glasses?
- But the effect is the same), when put up with the right thumb and forefinger gently pinch, bending aluminum wire naturally and paste on both sides of the nose, with the face is flat, breathe when gas could not run up, then a frame at the top, to call an insurance..
- Q:Which industries use carbide wire drawing die?
- And not very high metal wire need to use the general strength of cemented carbide drawing dies, such as ordinary steel wire, copper wire, aluminum wire, when the strength increases to a certain extent, the higher the wire surface finish requirements, or need to wire the surface of copper, it needs to use the diamond wire drawing die.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
aluminium wire 0.05mm-0.95mm with high quality
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 20000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches