98.5% Fixed Carbon of GPC made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 21.2
- Supply Capability:
- 5002 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The High-purity Graphitized Petroleum Coke is made from high quality petroleum coke under a temperature of 2800°C. As a high-purity carbon material, it has characteristics of high fixed carbon content, low sulfur, low ash, low porosity, high absorptive character , no residue will be left and save production cost etc.
This product can be used as carbon raiser (Recarburizer) to produce high quality steel, special steel, cast iron and alloy or other related industry. We can get high quality steel if use it. It can also be used in plastic and rubber as an additive.
Features
The graphitized petroleum coke powder (grain) is made by graphitization heat treatment of high-quality low-ash petroleum coke at high temperature of 2800 ° C or above in vacuum. The product is featured by high carbon content, low hardness, high temperature resistance, large porosity and low heat conductivity coefficient. Compared with the traditional natural graphite and calcined coke, it can obviously improve caking property and stabilize friction coefficient, maintains the stable and comfortable braking process, and reduce the damage to mating plate surface, brake noise, wear and cost, and is an ideal material for the friction material plant.it is playing more and more important role in the industry
In order to control the package and quality, we send people to inspect the loading at loading port and take samples for third party inspection for everyshipment, and will keep customers updated about the loading condition and the inspection result.
Graphite petroleum coke is used in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, graphite petroleum coke has high absorptive character, no residue will be left, save production cost.
Specifications
Products | GPC | |
F.C.% | 98.5MIN | 98MIN |
ASH % | 0.8MAX | 1MAX |
V.M.% | 0.7 MAX | 1 MAX |
SULFUR % | 0. 05MAX | 0.1MAX |
MOISTURE % | 0.5MAX | 0.5MAX |
SIZE: | 1-5MM 90% min | |
Package | By MT jumbo Bag | |
Pictures
FAQ
1, Usage: used to improve the Carbon content in steel-melting and Ductile iron foundry
2, Characteristic: high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3, apply: Used in electric furnace steel smelting and cast-iron for improving the carbon content
- Q:How to distinguish between iron powder, aluminum powder and graphite powder (pencil core powder), there are two ways
- Method two: Ignite (ignite in oxygen bottle)Iron sparks, release a lot of heat, and generation of black powderAluminum burns violently, gives off dazzling white light, emits a large amount of heat, and simultaneously produces white solidThe graphite powder is formed to clarify the turbid water of the lime waterMethod three: in reverse order with method(1) take a little powder and add dilute hydrochloric acid respectively
- Q:Is the graphite powder produced with sulphuric acid?
- Graphite powder can smash through physical production method, also can be produced by sulfuric acid and other chemical methods, according to different types of graphite powder, the production process is not the same, I hope there is help for you, hope to adopt, thank you.
- Q:The difference between silicone and silicone?
- Characteristics of silica gel:Silica gel is a one component, room temperature vulcanized liquid rubber. Once exposed to air, the silane monomer condensed, forming a network structure, crosslinked, unable to melt and dissolve, elastic, rubbery, and adhesive. The thermal conductivity is slightly higher than the general rubber, but compared with the thermal grease is much lower, and once cured, it is difficult to separate the adhesive objects, generally can only be used in graphics cards, memory radiator. Mainly used in silicone adhesive low-end card heat sink and the main chip, bonding and particles, particles of the memory memory and radiator. The high-end products are generally used to dissipate heat with grease, and then use the clip fins fixed on the substrate, but it will increase the cost of. The radiating fins are fixed in the low-end graphics chip and good memory particles, and the heat sink in the low-end graphics cards generally are relatively small, so the use of silicone adhesive is common; and high-end graphics and the CPU heat is far greater than the general low-end graphics chip and memory particle heat generation, and the head is relatively CPU so, the grease with radiator and clip form. If used on the CPU will cause overheating, and it is difficult to remove the heat sink, pull down, it may directly damage the CPU or CPU socket. And if you pull down the silicone adhesive cards, heat sink, it is possible to display the chip from the PCB pull down. From this point, we can see who has a better heat conduction effect.
- Q:Is oxygen allowed in the oxygen pipe?
- The so-called oxygen pipeline, which depends on the medical or edible, or industrial oxygen pipeline. If it is industrial, a little graphite is possible, but the proportion can not be too large
- Q:Will dust explosion occur in graphite dust? If you have definite or negative judgment, please share it according to data.
- Dust explosion condition(1) flammable dusts are suspended in the air at proper concentration to form dust clouds which are often called;(2) adequate air and oxidizing agents;(3) there is fire or strong vibration and friction. Generally believed that the explosive dust as long as the conditions (1) and conditions (2), it means that there are possible signs of the accident.
- Q:Distinguish iron powder and graphite powder by chemical method
- 1., add dilute hydrochloric acid or dilute sulfuric acid, the bubble is iron powder2. heating, iron powder is black, graphite is ignited in the air3. is mixed with copper oxide, and heating, plus graphite can be generated to clarify the muddy lime water turbidity CO2, iron powder No.
- Q:Main ingredients of graphite powder?
- These impurities often appear in quartz, pyrite, carbonate and other minerals.
- Q:Graphite and graphite in the end is not a matter I would like to know the graphite and graphite
- Graphite is graphite powder are the same material, graphite graphite is an alias
- Q:Can you tin to latex paint
- Latex paint and self spray paint are not rustproof against iron. The main component of antirust paint is antirust pigment and film forming material. Usually in the name of anti rust paint named, such as: rustproof paint, antirust paint, iron oxide red. If it is divided into four categories: antirust, paint, chemical action, antirust paint, electrochemical action, antirust paint, comprehensive function antirust paint.
- Q:Know how the colloidal graphite powder comes in
- There are two ways to make colloidal graphite: (1) mechanical method. Natural graphite is crushed and treated with hydrochloric acid and hydrofluoric acid to remove impurities. Added to the aqueous solution of tannic acid, which is repeatedly inverted into paste. Colloidal graphite can be obtained by adding a certain proportion of water and ammonia, and then by ultrasonic treatment to further reduce the particle size. (2) chemical method. After being purified and crushed, the natural graphite is added with concentrated nitric acid and concentrated sulfuric acid and water at 90 DEG C, and then obtained by cleaning, drying, adding water, ethanol, acetone and other dispersing agents to obtain colloidal graphite. Add stabilizer such as sodium oleate, sulfate and so on, so that graphite particles do not agglomerate. Ammonia transfers the graphite colloid to the gum solution and regulates the pH value.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
98.5% Fixed Carbon of GPC made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 21.2
- Supply Capability:
- 5002 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
