Grp Reinforced Plastic

Hot Products

Excellent corrosion resistance FRP Chimney and Flue

Low friction coefficient with High Pressure GRE Pipe with noxic of different styles

Glass-fiber Reinforced Epoxy Pipe System LNG 100mm

Customized high strength GRP/FRP Pipes made in China

Supply of FRP pipe jacking-Chongqing Sitongbada factory direct sales

Maintenance Free FRP Pipe without consequent pollution made in china of different styles

high strength excellent properties of corrosion resistance FRP pipe

High strength Corrosion-resistant Light weight Marine GRE Pipe

Glass-fiber Reinforced Epoxy Pipe System LNG 80mm

Fiberglass Anti-corrosion underground FRP GRP Pipes

FAQ

What is the structure and function of glass fiber reinforced plastic lining?

The role of FRP lining, corrosion protection, generally attached to the carbon steel container wall, can avoid the use of stainless steel, saving costs. FRP can resist acid and alkali corrosion, PH2-12 or so no problem, but not high temperature, the temperature is higher than 80 degrees, more dangerous, will dissolve.

Slurry circulation glass fiber reinforced plastic pipe

Slurry circulation glass fiber reinforced plastic pipe anti fouling and anti boring. Unsaturated polyester resin pipe surface clean and smooth, the special media will not be defiled rot fungi and other organisms have, for example, steel, cast iron or steel reinforced concrete pipes, the surface is easily attached and difficult to remove microbial decay, resulting in increased roughness, reduce cross section. The glass fiber reinforced plastic pipeline will not produce microorganisms in the case of light avoidance, so it is pollution-free and long-term clean.

What is the standard of flange coefficient for FRP ducts?

Can be explained in this way, the flange width is generally 50, on both sides that is 100, flange thickness is calculated as two times the thickness of the pipe, or 200. The duct length is 2000 knots, and 200 is 2000 of the 10%

What are the materials used in smoke exhaust pipes?

According to the current national standards: ventilation pipe exhaust pipe material selection of steel pipe (steel), galvanized plate (Bai Tie) smoke pipe, the exhaust pipe exhaust pipe, exhaust pipe, stainless steel pipe, plastic glass smoke exhaust pipe, composite sandwich insulation board, industrial exhaust pipe exhaust exhaust pipe.

What kind of material is the pipe of the pipe that installs the pressure transmitter of GRP conduit? Is it fiberglass or carbon steel?

This depends on what your medium is, the general food industry requires stainless steel, but the medium contains acidic substances, stainless steel is better than FRP corrosion resistance

Glass fiber reinforced plastic pipeline to do anti-corrosion?

Itself is a corrosion resistant material, no need for corrosion protection

What is the stiffness of FRP pipe?

The ring stiffness is the comprehensive parameter of the tube's resistance to external pressure. Obviously, the choice of ring stiffness is one of the keys to ensure the safe operation of plastic underground drainage pipe under the external compressive load. If the ring stiffness of the tube is too small, the tube may undergo excessive deformation or buckling failure. On the other hand, if the ring stiffness is chosen too high, the excessive cross section moment of inertia must be used, which will result in too much material and too high cost.

How to prevent the glass fiber reinforced plastic pipe from being damaged by aging or over pressure, causing the liquid to splash and hurt people

If you are afraid of the glass tube will be such a question, the weak links or parts of the local reinforcement, the conditions can, can re pipe liner, to compression, anti ageing effect