Ultra High Power (UHP) Graphite Electrodes
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
Place of Origin: | China (Mainland) | Brand Name: | CMAX | Model Number: | JX-UHP |
Type: | Electrode Block | Application: | steel smelting | Diameter: | Dia200-700mm |
Length: | 1800-2200mm | Grade: | UHP (Ultra High Power) | Resistance (μΩ.m): | 11-13 |
Apparent Density (g/cm³ ): | more than 1.8 | Thermal Expansion: | 1.4-2.8 | Round Size: | Dia350x450 dia400x450 dia500x450 dia585x600 |
Square Size: | 400x400x400 400x400x500 400x400x600 900x540x260 | Bulk Density: | more than 1.8 | Product name: | uhp graphite electrode |
Dimensions: | Dia350x450 dia400x450 dia500x450 dia585x600 | Chemical Composition: | carbon and graphite |
Packaging & Delivery
Packaging Details: | standard package for exportation |
Delivery Detail: | 15-25 days after confirmation |
Technical Data | ||||||||
PROPERTY | JXRP | JXHP | JXUHP | |||||
1 | 2 | 1 | 2 | 1 | 2 | |||
Electric resistance | μΩm ≤ | electrode | 8.5 | 9.0 | 6.5 | 7 | 6.0 | 6.5 |
nipple | 8.0 | 8.5 | 6.0 | 6.5 | 5.0 | 5.5 | ||
Bending strength | Mpa ≥ | electrode | 8.0 | 7.8 | 11.0 | 10.5 | 11.0 | 10.0 |
nipple | 13.5 | 13.0 | 14.0 | 14.0 | 16.5 | 16.0 | ||
Elastic modulus | Gpa ≤ | electrode | 8.0 | 9.3 | 11.0 | 12.0 | 13.5 | 14.0 |
nipple | 13.0 | 14.0 | 15.0 | 16.0 | 14.5 | 18.0 | ||
Bulk density | g/cm³ ≥ | electrode | 1.56 | 1.52 | 1.62 | 1.60 | 1.65 | 1.64 |
nipple | 1.70 | 1.68 | 1.72 | 1.70 | 1.72 | 1.70 | ||
Ash content | % ≤ | electrode | 0.3 | 0.5 | 0.2 | 0.3 | 0.2 | 0.3 |
nipple | 0.4 | 0.5 | 0.2 | 0.3 | 0.2 | 0.3 | ||
C.T.E | 100-6/℃ ≤ | electrode | 2.8 | 2.9 | 2.4 | 2.4 | 1.5 | 1.5 |
nipple | 2.7 | 2.8 | 2.2 | 2.2 | 1.4 | 1.4 |
- Q:The original battery is not necessary to form the electrode potential? Why can we use graphite as electrode only? No potential difference.
- A galvanic cell is a device that converts chemical energy into electrical energy. Electron transfer not by oxidizing and reducing agents to complete the effective collision between, but the reducing agent loss electron oxidation reaction occurs in the anode, the electron transport to the anode through the external circuit, the oxidant to the anode electron reduction reaction, so as to complete the transfer of reductant and oxidant electrons.
- Q:Which department in the steel plant needs graphite in large quantities?
- For steel and iron alloys, graphite electrodes are used, when powerful currents pass through electrodes into the melting zone of the electric furnace to produce an arcThe electric energy is converted into heat energy, and the temperature is increased to about 2000 degrees, so as to achieve the purpose of smelting or reaction. In addition, the electrolytic goldWhen the magnesium, aluminium and sodium are used, the anode of the electrolytic cell is also made of graphite electrode. The resistance furnace for carborundum is also made of graphite electrode as the burnerConductive material.
- Q:Use of graphite in steelmaking
- Graphite can be used as an agent for carburizing in the steel making industry. Carburizing uses a wide range of carbonaceous materials, including synthetic graphite, petroleum coke, metallurgical coke, and natural graphite. Worldwide, the use of graphite for carburizing is still one of the main uses of earth like graphite.
- Q:Electrolytic salt water why use iron as a cathode, all with graphite can not?
- From an economic point of view, the storage amount of iron is much larger than that of graphite, graphite iron is cheaper and easier to get.
- Q:How long is the graphite electrode machining cycle?
- Industrial graphite is hard and brittle, and the tool is worn more seriously during machining. It is generally recommended to use carbide or diamond coated cutting tools. When the graphite is rough, the cutter can be directly worked on the workpiece. When it is finished, it is necessary to use light knife to walk quickly to avoid the occurrence of chipping and chipping
- Q:Do electroplating experiments, graphite as an electrode, graphite how to pre process to ensure that the coating will not fall, resulting in increased color of the solution
- Both of these will be a little bit absorbed, when plating, the anode and anode inside the syrup will run on the negative pole,
- Q:I used 12V direct current, graphite electrode electrolysis sodium sulfide solution, the anode produced a large number of black material, this is why ah?
- The problem is this. I have done the test of electrolytic copper sulfate, and the anode produced the same phenomenon. Finally, the chemistry teacher told me that it was because the graphite was broken in the process of electrolysis
- Q:National standard for graphite electrodes
- Page 7 the international standard specifies the shape, dimensions and tolerances, technical requirements, test methods, packaging, marking, storage, transportation and quality certificates of graphite electrodes. This standard applies to high quality petroleum coke, asphalt, coke as the main raw material, through molding, roasting, impregnation, graphitization and mechanical processing made of, power supply arc furnace as conductive material of ordinary power graphite electrode. Common power graphite electrode GB
- Q:What is the striking electrode in the die making? Where is the technical point?
- The electrode in die processing is edm.The discharge produces sparks and forms a "corrosion" to the other pole. The method of machining parts (dies) using this phenomenon is called edm.
- Q:Graphitized coke, graphite, broken, mixed up, how to export?
- Graphite electrode pieces in different data definition of graphite scrap is different, some data and literature of the graphite particles are called not great pieces of graphite (such as graphite) and some say that graphite products have a certain size, into a block of graphite broken, we are here to say Shi Mosui is second, often called as the graphite block. The production of graphite from graphite products, graphitization and machining process. Graphite waste used as an additive and as a conductive material in the steelmaking and casting industries.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Ultra High Power (UHP) Graphite Electrodes
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches