Mono Solar Panels CNBM 280W-300W
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Mono Solar Panels CNBM 280W-300W
CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements.
It is the optimal choice for both on-grid and off-grid power systems.
CNBM Solar panel offers high performance of power per square foot of solar array.
Monocrystalline silicon(c-Si): often made using the Czochralski process.
Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon.
Hence most c-Si panels have uncovered gaps at the four corners of the cells.
Applications of Mono Solar Panels CNBM 280W-300W
On-grid or off-grid solar power system;
MW Solar Power Plant;
Commercial and industrial building roof-top systems;
Home and official appliances power supply solar systems;
Characteristics of Mono Solar Panels CNBM 280W-300W
I.Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.
II.Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.
III.EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.
IV.AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.
V.Junction box: Multi function junction box with water proof.
VI.Long lifetime: ≥25 years; Less power decrease.
VII.Good performance of preventing from atrocious weather such as wind and hails.
VIII.Resisting moisture and etching effectively, not effected by geology.
IX.The certificate issued by international authority: UL, TUV, IEC, VDE, CE.
Standard Test Conditions of Mono Solar Panels CNBM 280W-300W
The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.
Advantages of Mono Solar Panels CNBM 280W-300W
• CNBM Solar performance guarantees for 25 years
• 12 years guarantee for workmanship
• Timeliness of delivery
• Quality Products certified (TÜV, UL, CE, VDE, ISO)
Datasheet of Mono Solar Panels CNBM 280W-300W
Characteristics of Mono Solar Panels CNBM 280W-300W | |||||
Max Power Voltage Vmp(V) | 36.2 | 36.2 | 36.2 | 36.7 | 36.7 |
Max Power Current Imp(A) | 7.74 | 7.87 | 8.01 | 8.04 | 8.17 |
Open Circuit Voltage Voc(V) | 44.9 | 44.9 | 44.9 | 45.5 | 45.5 |
Short Circuit Current Isc(A) | 8.36 | 8.50 | 8.65 | 8.68 | 8.83 |
Max Power Pm(W) | 280W | 285W | 290W | 295W | 300W |
Temperature Coefficient of Mono Solar Panels CNBM 280W-300W | |
NOCT | 45℃±2℃ |
Temperature Coeffucients of Isc (%/℃) | 0.0492 |
Temperature Coeffucients of Voc (%/℃) | -0.3374 |
Temperature Coeffucients of Voc (%/℃) | -0.4677 |
Mechanical Data of Mono Solar Panels CNBM 280W-300W | |
Dimension | 1957 × 992 × 50 mm |
Weight | 26 kg |
No. of Cells and Connections | 72 (6 × 12 ) |
Tolerance | 0 ~ + 5 W |
Cell | Monocrystalline Cell 156 × 156 mm |
Packing | 506 Pcs / 40ft(H) Container |
Limits of Mono Solar Panels CNBM 280W-300W | |
Operating Temperature | -40℃ to +85℃ |
Storage Temperature | -40℃ to +85℃ |
Max System Voltage | 1000VDC(IEC)/600VDC(UL) |
Guarantees of Mono Solar Panels CNBM 280W-300W | |
Products Guarantee | 10 yrs free from defects in materials and workmanship |
Performance Guarantee | No less than 90% within 10yrs and no less than 80% within 25yrs |
Certificates | TUV(IEC61215&IEC61730),VDE(IEC61215&IEC61730),UL,CE |
The IV Curve of Mono Solar Panels CNBM 280W-300W
Picture 1. The factory of Mono Solar Panels CNBM 280W-300W
Picture 2. Production of Mono Solar Panels CNBM 280W-300W
Picture 3. Packages of Mono Solar Panels CNBM 280W-300W
WHY CHOOSE US?
1. Excellent efficiency, Easy Installation & Maintenance
2. Outstanding performance in Low-Light
3. High transparent, Low-Iron, Tempered Glass
4. Ability to withstand High Wind-Pressure and Snow-Load
5. Advanced module sealing technology to eliminate leakage and frame deformation
6. Competitive price to save your cost!
- Q:We have LED at the output of 40 watts and is used for 0 hours giving us 400 Watts-hr of energy consumed.Rechargable batteries needed are 2 V. 400/2 gives us 34 Ampere-hour battery needed. If we want it for 3 days, It would be 34x3=00 Ah. So the battery needed 00 AhNow how do I select the solar panel which can charge this/these batteries? What should be its rating?
- First, you need to make sure that your battery can take a regular 34Ah discharge without damage. The usual wisdom when using deep cycle lead-acid batteries is to allow for no greater than 50% discharge. This is to prevent the battery from ageing prematurely. Note that automotive batteries are not usually considered suitable for deep-cycle applications. Best allow for at least 200Ah capacity. Your solar panel capacity needs to take into account that whatever the nameplate output of the panel, that will be what it will produce under ideal conditions, actual output will always be less, often quite a bit less. You also need to allow capacity to cope with dull, overcast days when the light level is very low. You can get solar maps that will give you the sunshine hours and irradiation levels at your location. The solar panel capacity ends up being a juggling act between available funds/space and how critical it is that the light always works as desired. Let's say you had a 400W panel, which sounds quite generous. In the middle of winter, it may produce only 75W for 5 hours on a dull day, not quite enough to run the light for 0 hours. Would you expect several such days in a row? How many days could a 00Ah of battery capacity cover under these conditions?
- Q:I am moving to Hawaii and the house we are living in has independent electricity. (solar panels and gas powered generators.)
- You would have some kind of thing that captures the kinetic energy and transfers it to electrical energy so it would run, but, yeah.
- Q:Can solar panels be used in areas with high pollution levels?
- Yes, solar panels can be used in areas with high pollution levels. While pollution may slightly reduce the efficiency of solar panels by blocking some sunlight, they can still generate electricity. In fact, using solar panels in such areas can be beneficial as they provide a clean and renewable energy source, helping to reduce reliance on polluting fossil fuels.
- Q:i have to do a science fair project and thought it would be cool to make a solar powered vw bus. i have 2 6volt solar panels to power a dc motor that works off of 9v 2v or 8v. i also bought a 2nd motor because the first wasnt workin for us. this one is a 3v motor. ive had them in the sun but they wont work. please help, thanks
- Ok okorder
- Q:I am seriously thinking about installing PhotoVoltais Solar panels (that generate electricity) on my roof. Besides the usual (cost, ROI, etc.), I was researching for the maintenance of these panels. We have tall trees around the house and needles and leaves fall on our roof all the time... not to mention the dirt and grime that collects over time.Do these decrease the capacity of the panels? Do the panels require a regular maintenance?Thanks!
- New solar panels are clean and shiny and they look cool. Then they get dirty with dust and debris caught on the wind and residues left behind by rain and birds. Solar panels must be regularly cleaned and maintained in order to keep them operating efficiently and maximize the amount of sunlight they convert into electricity. Unlike windows your solar system needs to have a clean and clear surface to ensure they are working at their maximum efficiency. If they are not at their optimum performance it means they are not producing the amount of electricity that they could be. Solar panels will attract dirt, dust, soot, pollen, tree sap and salt crystals in coastal regions creating a fine layer of grime. This layer reduces the amount of light reaching the silicon cells under the glass surface and reduces the panel's effectiveness. A solar panel that has never been cleaned could be producing almost a third less power than it otherwise could be. Some have reported a ten to fifteen percent loss of solar output due to dirty panels. From the ground the panels may appear to be clean, just like your windows. Up close however you can see the grime that has built up from the dirt and pollution in the air. A more noticeable deposit that can be left on panels is bird droppings. These tend to completely block the light from areas of the photovoltaic panel and can considerable reduce its effectiveness. See much more about solar panels maintenance below link
- Q:about solar panel
- The answer depends upon the type of solar energy captured . Photovoltaic Solar Panels convert the energy into electricity. This electricity is ran throughout the building via wires. Thermal Solar Panels typically capture the energy in the form of heat. The hot water is circulated through the building in water pipes.
- Q:if u buy solar panels and never take em out of the box for like thirty years will they still work good thirty years after you bought them
- They should do fine.
- Q:Are solar panels suitable for all types of roofs?
- Solar panels are suitable for most types of roofs, including flat, sloped, and metal roofs. However, the suitability may vary depending on factors such as roof orientation, shading, and structural integrity. It is recommended to consult with a solar installation professional to determine the best options for a specific roof type.
- Q:Can solar panels be installed on streetlights?
- Yes, solar panels can be installed on streetlights. They provide a sustainable and cost-effective solution by harnessing the sun's energy to power streetlights, reducing the dependence on traditional electricity sources and lowering overall energy costs. Additionally, this renewable energy option helps to reduce carbon emissions and promote environmental sustainability.
- Q:solar panels or light parts
- They make lights that have solar panels built into them. Due to the solar cell, they can sense when it gets dark and thus switch on the light automatically. Look at Northern Tool or Harbor Freight web sites for ideas.
1. Manufacturer Overview |
|
---|---|
Location | Jiangsu, China |
Year Established | 2004 |
Annual Output Value | Below US$1 Million |
Main Markets | Australia;Asia;South East Asia; South America;North America; Europe;Africa |
Company Certifications | ISO 9001:2008; CE; TUV; UL |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 1% - 10% |
No.of Employees in Trade Department | 200-300 People |
Language Spoken: | English;Chinese |
b)Factory Information | |
Factory Size: | Above 8,000 Square meter |
No. of Production Lines | 6 |
Contract Manufacturing | OEM Service Offered;Design Service Offered |
Product Price Range | Average |
Send your message to us
Mono Solar Panels CNBM 280W-300W
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords