4G LTE FDD-1800 Single Band Mobile Signal Booster Amplifier Repeater Full Kits
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Application:
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
Now you can reach everywhere with signal boosters!
2. Frequency bandwidth of LTE-1800MHZ.
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
8. Supports up to (30) users / calls simultaneously.
Humidity: 5-95%
1. Warranty covers replacement within 12 months.
2. All returns must have an RMA number before they are returned to us. If product is received without an RMA number
it will not be processed.
3. You must place the item(s) including all accessories to be returned in protective packaging (shipping box) with bubble
wrap and make sure that the item(s) do not shake or rattle. Items that are sent in envelopes and incorrect shipping
containers will be refused and returned at your expense.
- Q:About wireless routers and repeaters.
- You can choose a better signal point, must be stable signal, anytime can receive the signal place. Ann a router, do WDS directly on the line.
- Q:What is the difference between an amplifier and a repeater?
- Operational amplifiers are widely used devices. They are connected to an appropriate feedback network and can be used as precision AC and DC amplifiers, active filters, oscillators and voltage comparators.Repeater: OSI (Repeater) works on the physical layer of the network. It is the center of all nodes on the LAN. Its function is to amplify the signal, compensate the signal attenuation, and support long distance communication.
- Q:How to connect the router Tuoshi wireless bridge repeater
- For example: A----B----C, a total of three sites, if A and B can be wireless bridging, B and C can also be wireless bridging, but A and C because of distance, can not wireless bridging. If you want ABC to be wirelessly connected, what's the solution? Then we can use ABC as a relay function (which is also one of them). After A and B relay, B relays C again. You should understand it, in addition, the relay can be connected to a wireless router with no bridge, the bridge to set the binding of MAC and IP, and the relay is not, as long as the wireless router signal can absorb (of course with WEP or WPA password you need to fill in).
- Q:What brands of wireless routers do trunking?
- As long as you can use the relay function, or directly buy a wireless repeater, can enhance the signal, but also increase the signal coverage area, you look at ASUS RP-N53, dual frequency 600M, the setting is super simple, very practical.
- Q:My routing repeater, I want to hide my hot spots, hide ssld, show this
- The proposed switch off, his role is that the password is too complex, you can use WPS to connect.
- Q:What is the wi-fire Wi-Fi network signal repeater (enhancer)? Can the WiFi signal be increased?
- Yes, is the signal amplifier, for example, your WIFI can only cover 10 meters, and you want to use the Internet in the 15 meters, then you can place 8 meters plug repeater, you can place 15 meters on the internet.
- Q:The relay mode of the WiFi router is to send on the side of the receiver
- In radio transmission, antennas with higher gain will improve a bit, but the effect is far less than you can put the antenna up to higher ground. Effective indoor transmission of WIFI. No more than 50 meters, outdoor (both sides of the transmitter and receiver antenna are outdoors) can reach 200~300 meters. Further distances require the use of external directional antennas.
- Q:Repeaters can amplify several WiFi signals, such as three WiFi in my house, and whether the three signals will be very good!
- No, the repeater can only amplify one route WiFi at the same time
- Q:How does the relay set up the connection WiFi?
- Because of the different brands, the different settings of the model will be different, sometimes very different,Take mercury mw300r for example:Remember that routers that require wireless bridging (preferably fixed channels), SSID, password types, passwords, and other data are open to their DHCPThen login to the router and change the router's LAN address to 192.168.1.2 or other addresses that are different from the main router's network segment.
- Q:TP-LINK wireless signal repeater. What mode should I choose?
- In addition, you can also try REPEATER mode, relay mode, the settings are relatively simple, but it is not clear what your model. Recommend to read the instructions and then set up.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
4G LTE FDD-1800 Single Band Mobile Signal Booster Amplifier Repeater Full Kits
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords