Chrome Magnesite Refractory Thermal Expansion

Hot Products

Refractory Silica Insulation Fire Brick

Heavy Desity Refractory Silica Bricks Sio2 95%

High Quality Refractory Silica Brick

Silica Bricks for Coke Oven and Hot Blast Stove

Refractories Acid-resistant / proof Brick

Factory Suppier Standard Silicon Brick Silica Fire Block

Refractory Silica Brick for Coke Oven/Furnance

Fireproof High Temperature Refractory Fire Clay Aluminum Silicate Bricks for Boiler

Silica Refractory Brick for Stoves Price

Kiln Refractory Blocks Silica Brick with Silicon Oxide Above 95%

FAQ

Why in the production of the brick to detect the volume density

Density is the property of material, different density of materials, density of the same kind of material is not up to standard, affecting performance.

Can iron oxide be used as refractory material?

Is widely used in this area. Mentioned refractory material of high school textbooks generally refers to three two aluminum oxide (alumina), alumina is also used as a refractory material, refractory crucible, porcelain, artificial gemstones.

Brick

An acid refractory consisting mainly of quartz and square quartz and a small amount of residual quartz and glass.More than 94% silica content. True density 2.35g/cm3. With acid resistance, slag erosion performance. Higher high temperature strength. The softening start temperature is 1620~1670 degrees. Long term use at high temperature without deformation. The thermal shock resistance is low (the heat exchange in water is 1~4 times). The natural silica is used as the raw material, and a proper amount of mineralizer is used to promote the transformation of quartz into quartz in the body. Slowly sintered at 1350~1430 DEG C in the reducing atmosphere. When heating up to 1450 degrees, the total volume of 1.5~2.2% expands, and the residual expansion can close the kerf and ensure the airtight and structural strength of the masonry.

Physical solid waste disposal

The production of silicon material is added to the cause of waste brick:Preparation of silica brick pug, a certain amount of waste silica brick used to add ingredients, for the purpose of expansion and stress reduction products during firing

High temperature refractory material?

Basic refractories in Magnesium Oxide and calcium oxide as the main component, the main products are magnesia brick, magnesia chrome brick, magnesia zirconia brick, magnesia brick, magnesia spinel brick, magnesia calcium brick, dolomite brick and the latest development of magnesia spinel brick and so on. With Magnesium Oxide (MgO) more than 80% of the refractory brick called magnesia brick,

The high thermal conductivity of silica brick and traditional brick what is the difference?

Brick, high thermal conductivity has been greatly improved in terms of morphology, crystal structure, physicochemical index. The structure and morphology of high thermal conductivity of silica brick,Structure and morphology of high thermal conductivity and the traditional brick brick magnified 20 times were compared, high thermal conductivity silica pore size distribution is more uniform and finer.

The specific content is what gb/t2608-2012 brick

The provisions of the brick classification, technical requirements, test methods,

The United States of our brick anti-dumping duties?

. According to the relevant legal procedures, the United States International Trade Commission will make a final ruling on the anti dumping industrial injury before January 6, 2014, if an affirmative determination, the U.S. Department of Commerce will be involved in product release tax anti-dumping order.