Solar FTO Glass
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 100 m2 m²
- Supply Capability:
- 10000 m2 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
FTO Glass or AZO Glass is a kind of TCO glass mainly used for producing thin film solar cells as substrate/front TCO glass or seal glass/back glass. The right balance between transmittance, haze and conductivity of the TCO coating enable it to improve the cell efficiency of thin film solar cells embedded in photovoltaic modules.
Features of Solar FTO Glass:
Light transmittance: >80%
Sheet resistance: 7-15Ω
Haze: 10%-50%
good laser etching properties
good weatherability and durability
High light transmittance, high mechanical strength, high planeness.
Product’s Description:
Type | TCO Glass(Ultra Clear Float Glass) |
Conductive Coating | SnO2: F Based or ZnO: Al Based |
Deposition | CVD |
Applications | Front glass or back glass for thin film solar cells (a-Si: H solar cells, μc-Si tandem solar cells and CdTe solar cells). |
Specifications of Solar FTO Glass:
Thickness: 3.2mm, 4mm,
Size: customized size
Applications of Solar FTO Glass:
FTO Glass or AZO Glass is widely applied in a-Si: H solar cells, μc-Si tandem solar cells and CdTe solar cells because of its potentials to lower the reflectivity between the interface and the absorber, to increase the light path into the absorber and to trap the solar energy into the absorber.
- Q:What are these things that belong to the reactor's raw materials?
- Iron core reactor raw material is similar, more out of the core is made of silicon steel sheet, folder is steel. The lead wires and the wiring bronze are likely to use heat shrinkable sleeves, but this is also available.
- Q:What kind of raw materials should be used in making FRP?
- The glass steel base material is a physical and chemical change of reinforcing material coated and firmly bonded component materials. Glass steel base material made of synthetic resin and auxiliary materials, wherein the synthetic resin is the main component. Matrix materials in FRP is the load transfer between fibers, and the load balancing. The properties of the matrix materials, such as corrosion resistance, heat resistance, directly affect the performance of FRP. Glass steel process determines the forming process of its choice.
- Q:What is glass fiber reinforced nylon?
- Add the mechanical properties of glass fiber, toughening agent [1] blends in nylon. The results showed that with the increase of fiber content, the tensile strength, the flexural strength of the composites is greatly improved, the impact strength is more complicated, toughening agent is added, toughness is greatly improved. The material adding glass 30% ~ 35%. 8% to 12% of the toughening materials, the best comprehensive mechanical properties.
- Q:What are the cutting and cutting of acrylic and aluminum-plastic plates?
- Acrylic comes from English Acrylic, generic name for Acrylic acrylic and methacrylic acids chemicals. Including monomers, plates, aggregates, resin and composite material, acrylic acid methyl ester by methyl monomer (MMA) polymerization, namely polymethylmethacrylate (PMMA) organic glass plate, "organic glass" from the name "Oroglas" (a PMMA), from the "Organic Glass" (organic glass).
- Q:The shell of glass steel electric cars will not be on the poor out of the glass Sizha?
- There are two kinds of molding process, high temperature molding (SMC molding) and room temperature molding (hand paste or vacuum assisted molding). SMC molded, there is no problem of glass fiber, hand paste or vacuum assisted molding. If it takes a long time, you will see the bare phenomenon of glass fiber. You can look at the back of his shell, and if you see the surface is not smooth, it should be hand shaped, usually if the car's output is very large, with SMC molding more. My humble opinion. I hope I can help you.
- Q:Why is the process of glass toughened always broken?
- It blew the concept of rate, the national standard of our country only glass project on the wall, I do not know whether the other foreign industry to use the toughened glass also has detailed provisions.
- Q:Who can tell me the raw material and function of the flashy glass?
- The roll of the roll is rotated, and the glass belt is pulled out of the tin groove into the annealing furnace. After annealing and cutting, the flat glass product is obtained.
- Q:The difference between natural crystal and crystal glass, merits and demerits!
- Crystal glass according to PBO (lead oxide) content is divided into high (24%PBO and above), medium (18%PBO), low (12%-16%PBO) three grades. Grading standards are similar to gold. International standard crystal glass is 24%PBO, so merchants will also call this class "24K"". If you go to buy, say some similar "jargon", the other party will feel that you are more adept, encountered illegal businesses, nor dare to fool you.
- Q:The preparation process of glass and the basic material and the function of raw materials
- Feldspar provides Al2O3 and enhances chemical stability in glass;Glauber's salt helps the high temperature glass to remove bubbles produced by carbonates in other materials
- Q:What is the ratio of raw materials for glass mildew proof powder?
- Environmental protection standards, with the domestic high-end glass development needs, coconut shell materials are gradually replaced by its excellent performance after falling green traditionChemical mildew proof isolating material.Applicability: (1) glass against mildew; II. Glass anti scratch;Other special applicability:Solid desiccant; plant cultivation raw material, animal feed, etc.; colloid filling material; catalyst carrier; impurity and harmful gas dispel;
1. Manufacturer Overview |
|
---|---|
Location | Hebei,China (Mainland |
Year Established | 1999 |
Annual Output Value | |
Main Markets | North America South America Eastern Europe Southeast Asia Africa Mid East Eastern Asia Western Europe |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Tianjin |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | English,Chinese |
b)Factory Information | |
Factory Size: | 30,000-50,000 square meters |
No. of Production Lines | 3 |
Contract Manufacturing | OEM Service Offered |
Product Price Range |
Send your message to us
Solar FTO Glass
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 100 m2 m²
- Supply Capability:
- 10000 m2 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords