Slag Pots for Steelmaking Production / Steel Slag Processing
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 80000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The slag pots are cast steel slag pots, which are divided into 2.13m3, 4m3, 5m3, 9m3, 12m3, 16m3, 18m3, 20m3, 24m3 and other types of slag pots.
Slag pot weight: 5-75 tons
Use of slag pot: The slag pot is mainly used to carry converter steel slag desulfurization slag and large ladle casting residue of continuous casting.
Advantages of slag pot:
Rich production experience: more than 17 year experience with 1,000 pieces of slag pot production in various specifications and material requirements.
Long service life: Compared with the slag pot produced by molten steel from converter furnace, the service life is 2-3 times longer, and can reach more than 5,000 times
Strong technical strength:We adopt the domestic advanced "Huazhu CAE" casting simulation software to simulate thesolidification process of the slag pot. Then adjust it based on the simulation results, to ensure theoptimal process parameters. At the same time, we introduced the "Simcast" finite element simulationsoftware developed by "Aachen University of Germany" to verify the casting process parameter.
Advanced smelting process
Product quality optimization
5.1 The trunnion of the slag pot uses a high-heat insulation riser for feedingfocusing on ensuring the safety of the trunnion and the slag pot necklace. Internal quality, reducing cracks during use of the slag pot.
5.2 Ultrasonic flaw detection of 500MM range of slag pot trunnion.
5.3 The inner surface of the slag pot is finished, and the surface is smooth reaching Ra<100 ,which prevents the steel slag from sticking and causing failure in normal use and affecting the service life.
Pictures of Slag Pot
- Q:There is a little trace of polishingShock polishing is even worseElectrolysis can not be uneven, there is a slight bump
- Buffing should be better, to see how your embryo, but a bit difficult
- Q:Domestic large steel castings factory which is better, recommend!
- At least spend money on research and development, then the quality should be all right.
- Q:Question, such as title, I hope I don't copy the definition of rolling and casting in Baidu encyclopedia, thank you
- Service performance: heat conductivity, friction reduction, shock absorption, heat resistance and corrosion resistanceTo compare these properties, it depends on the specific material, structure, and use of the parts. Otherwise, there is no comparisonS
- Q:How to improve the surface roughness of casting parts?
- First, the accuracy of the model should be improved; two is to change the molding technique; the three is the coating; and the worker's technical level.
- Q:Casting parts need to be subjected to the kind of heat treatment after the weldment is finished
- Annealing is needed to eliminate stress and refine grain
- Q:What is the casting material?
- Commonly used gray cast iron, malleable cast iron, ductile iron, cast steel, etc., non-ferrous metal casting copper alloy, casting aluminum alloy, casting zinc alloy, etc..
- Q:What is the ejection angle of the die casting (Tan Gang)?
- Because after the wax, wax parts will have a slight contraction, which is good for demoulding. Many moulds don't do the ejection angle
- Q:What's the effect of casting copper?
- Copper is one of the main corrosion resistant alloys. When the mass fraction of copper in cast iron is from 0.25% to 1%, the corrosion resistance of copper in the industrial atmosphere can be obviously increased. But copper has very little corrosion resistance in lye or salt solution.Copper can increase the flowability of molten iron and improve its casting ability remarkably.Copper can increase the coercive force and residual magnetic force, but the permeability is not affected.Combined use of copper with other alloy elements, such as copper chromium, copper chromium molybdenum, copper molybdenum, copper manganese, copper vanadium, can achieve greater results.
- Q:What should I pay attention to when designing a casting structure?
- The basic structure of unit 3 in the design of metal casting casting and its parameters are selected, usually should also pay attention to: (1) because of the metal type heat quickly, so the metal type casting minimum wall thickness should be bigger than the sand casting casting casting; (2) the inner wall of the internal ribs and the thickness of a should be connected the outer wall thickness of 0.6 to 0.7, or as the inner wall (rib) cold slowly, cracks in the wall at the junction in the casting shrinkage; (3) to prevent generating white grey cast iron, in addition to taking measures in the process, must make the wall thickness is not too thin (some information that cast fillet at the corner of the wall thickness of 15mm or more, with metal casting casting must be in the corner, for Aluminum Alloy, metal casting magnesium alloy castings shall not be less than 3 ~ 4m; (4) because of the metal type and the core that, for To facilitate the extraction of castings and casting out type, slope casting should be suitably large than sand casting metal casting, the general should be 30% ~ 50%, it should be pointed out that in addition to the height of the slope of casting size and alloy type, wall, is also related to the casting surface position, where the cooling and contraction of the metal type the surface of casting surface can be designed from the tendency of small inclination, while casting shrinkage tend to be pressed on the surface of metal casting type should be given greater inclination.
- Q:How to calculate the price of casting parts?
- According to the complexity of the workpiece, material and casting requirements and process yield
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Slag Pots for Steelmaking Production / Steel Slag Processing
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 80000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
