large diameter steel reinforced corrugated polyethylene pipe
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m
- Supply Capability:
- 50000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Steel reinforced corrugated polyethylene pipe is a new kind of corrugate pipe taken HDPE as body with parietal layer spirally wound and hollow rib reinforced by lining steel strips. SSRCSP owns unparallel advantages compared with traditional metal and concrete pipes,owing to the adoption of ring hollow structure wond with reinforcement made of steel strips, it owns the characteristics of high ring stiffness(8~16 Kn/m2),high strength and toughness,high pressure resistance and anti.sedimentation, light weight, impact and water sourcing resistance, high quake and freeze proof, breakage and leakage resistance, easy installation,long service life (50 years under normal usage conditions)and non-secondary pollution etc, besides the common characteristics of corrosion resistance, smooth wall and small flow resistance etc as the ordinary plastic pipes own, therefore, it’s widely used drainage, sewage, agricultural irrigation, mine ventilation, chemicals, telecommunications cablesheathing and other fields.Owing to light weight and safe and convenient transport and installation without using large equipments,it could reduce the labor intensity of contruction personnel and decrease the construction investment and it is the ideal replacement of Concrete pipe and ordinary plastic pipe.
Steel Reinforced Corrugated Polyethylene Pipe Characteristics:
1.High corrosion resistance and acid and alkali-resistance;
2.High ring stiffness,light weight and easy installation and construction;
3.High reliablity owing to seamless connection between inner wall bymeltingplastic;
4.Various connections could be choosed, simple and easy operation.
Physical Properties Table of Steel Reinforced Corrugated Polyethylene Pipe
| Items | Index | Test method | |
| Ring stiffness | SN8 | ≥8 | GB/T9674-2003 |
| SN12.5 | ≥12.5 | ||
| SN16 | ≥16 | ||
| Impact properties | TIR≤10% | GB/T14152 | |
| Peel strength(20°C±5°C)/N/cm | ≥70 | ||
| The ring flexibility | No rupture, no wall off | GB/T9647 | |
| Oven test | No stratification, no cracking | ||
| Tensile strength(N) of Polyethlene Connection Interface | ≥1460 | GN/T8804 | |
| Creep rate | ≤2 | GB/T18042 | |
Steel Reinforced Corrugated Polyethylene Pipe Sizes and Specification:
Norminal Ring Stiffness: SN4 SN8 SN12.5
Sizes: DN500mm-DN2200mm
| DN/ID | Average min inner diameter (dim.min) | The minimum thickness (emin) |
| 300 | 294 | 2.5 |
| 400 | 392 | 3 |
| 500 | 490 | 5 |
| 600 | 588 | 6 |
| 700 | 673 | 6 |
| 800 | 785 | 6.5 |
| 900 | 885 | 7 |
| 1000 | 985 | 7 |
| 1100 | 1085 | 7 |
| 1200 | 1185 | 7 |
| 1300 | 1285 | 7 |
| 1400 | 1385 | 7 |
| 1500 | 1485 | 7 |
| 1600 | 1585 | 7 |
| 1800 | 1785 | 7 |
| 2000 | 1985 | 8 |
| 2200 | 2185 | 8 |
Steel Reinforced Corrugated Polyethylene Pipe Fields of Application:
1.Agricultural Irrigation: used as deep-well pipe, strainer pipe,culvert pipe, drainage pipe or irrigation pipe etc.
2.Municipal Engineering: blow-off line,fire fighting pipeline,water supply, backwater, natural gas pipeline, etc.
3.Chemical Engineering: Discharge pipeline for corrosive gases, liquid, dust in industries of Acid, Alkali, salt manufacturing , Petro-chemical, chemical fertilizer, pharmaceutical, plastic, etc.
4.Oil-gas Field: pipeline for gathering oily sewage, gas-oil mixture, as well as secondary and tertiary oil recovery.
5.Thermal-electricity Engineering: pipeline for industrial water supply, backwater, conveyance of industrial waste residue, etc.
6.Metallurgy and mine: conveyance of corrosive medium, mining pulp, tailing and waste water during ferroalloy smelting; pipeline of conveying Coal Methane and water.
7.Highway construction: drainpipe and cable duct tube.
8.Ocean engineering: conveyance of sea water, offshore pipeline, cable/ optical cable duct tube.
9.Shipbuilding: ship pipeline, ballasting pipe, vent-pipe.
- Q:How to mend a hole in a plastic pipe?
- Front with a back adhesive, heat pressed, and then use the glass surface adhesive.
- Q:I want to bleed my clutch but I was wondering if I can do it without the plastic tube that goes on the bleed nipel??? Help?
- Yes, but it is a bit messy. Same procedure - person A opens the nipple about 1/2 turn, person B presses the clutch pedal down, A closes the nipple finger tight, B pulls the pedal up with his foot, repeat.... Use rags, paper towels, shop towels, or whatever to soak up the brake fluid as it comes out. An important note is that brake fluid is subject to spontaneous combustion when soaked up. (Brake fluid is a notorious part of the arsonist's toolbox.) Wet the soaked rags with water and seal them in a zip-lock bag or something else to keep air out before disposing of them.
- Q:Are plastic tubes suitable for vacuum applications?
- Plastic tubes are generally not suitable for vacuum applications as they are prone to collapsing under the pressure differential created by the vacuum.
- Q:Are plastic tubes suitable for pharmaceutical packaging?
- Yes, plastic tubes are suitable for pharmaceutical packaging. They offer various advantages such as durability, flexibility, and resistance to moisture and chemicals. Additionally, plastic tubes can be easily sealed to ensure product integrity and prevent contamination.
- Q:These are for storing coins have a locking lid or screw top lid. Also great for storing beads!
- Joann Fabric has a great selection. They're actually back in the bead isle.
- Q:Are plastic tubes FDA-approved for food contact?
- Yes, plastic tubes can be FDA-approved for food contact. However, it is important to note that not all plastic tubes are FDA-approved, as specific requirements and regulations must be met to ensure their safety for food contact.
- Q:Can plastic tubes be used for agricultural applications?
- Yes, plastic tubes can be used for agricultural applications.
- Q:How are plastic tubes cut to specific lengths?
- Plastic tubes are cut to specific lengths using various methods such as sawing, scoring and snapping, or using a tube cutter tool.
- Q:I have to make it for an invention product for school, and I need a good name that relates.
- Tidy laces !
- Q:Are plastic tubes resistant to ultrasonic cleaning?
- Yes, plastic tubes are generally resistant to ultrasonic cleaning. However, the specific resistance may vary depending on the type of plastic used in the tubes.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
large diameter steel reinforced corrugated polyethylene pipe
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m
- Supply Capability:
- 50000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
