GRP Water Tank/ FRP Storage Tanks/ Fiberglass Reinforced Plastic Tank DN6000
- Ref Price:
-
$20.00 - 2,000.00
/ set
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction
In the FRP .with high tensile strength, the fiberglass plays the role of reinforcement whiles the wear-resistance and pressure –resistance synthetic resin is used for bonding the fiber as the basic materials. Putting together, they commonly play the role of being in finished form and load carrier.
Feature
The wall structure of the FRP pipe is normally consisting of two parts:
Structure layer: make the continuous glass fiber woven of which is cross winded according to the design angle as the reinforcing frame. Make the synthetic resin as the bonding basic materials. Among them, the weight of fiberglass occupied about 65-70% weight of resin about 30-35%. In order to strengthen the structural stiffness, the resin and silicon sand paste could be added in the middle layer of fiberglass filament winding layer.
Specification
u 2.5” Precision injected threads opening available in 8”~16” diameter tanks
u 4” precision injected threads opening available in 18”~36” diameter tanks
u 6” Flange opening available in 42”~80” diameter tanks
u 8”~18” diameter tanks available top opening only
u 21”~80” diameter tanks available top and bottom opening
u Tripod bases available in sizes of 21”~80” diameter tanks
u Optional side opening is available
Materials
u The liner layer is PE (polyethylene) materials for 8”~36” diameter tanks
u The liner layer is FRP (fiber reinforced plastic) for 42”~80” diameter tanks
Working condition
u Operating pressure: 0.6Mpa (100psi)
u Bursting Pressure: 1.8Mpa (300psi)
u Testing pressure: 0.9Mpa (150psi)
u Working temperature: below 50 centigrade
Application
Pre RO, Ion Exchange, Water softener, water filtration, House hold water filtration, Food and beverage, water storage
Opening
u 2.5”~4” UN threads ABS opening;
u 6” Flange FRP;
u other customized manway and side flange
Advantage
u Good corrosion resistance
u High mechanical strength at low specific gravity
u Good resistance to weathering
u Light weight
u Good insulating qualities
u Provide less maintenance & repairs down time
u Easy installation
FAQ
1. What's the guarantee, in case the water tank breaks down?
The water tank has one year s guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts will be replaced for free if the problems are caused by quality fault.
2. How about the documents after shipment?
After shipment, we ll send all original documents to you by DHL, including Packing List.Commercial Invoice, B/L, and other certificates as required by clients.
PRODUCTION
FACTORY
PACAKGE
- Q:What are the maintenance methods of FRP tanks?
- FRP tanks have two molding methods: 1. hand paste molding, resin glass cloth, hand paste molding.
- Q:Finished acceptance of FRP tank
- To ensure the excellent quality of glass steel tank, must strictly enforce the quality inspection measures, Guangzhou Jing Hui glass steel Co., annual production of glass steel tank each procedure is subject to strict selection, real-time production monitoring after strict acceptance screening, the factory to ensure the quality of each product meets the provisions of the relevant departments.
- Q:Glass fiber (resin) storage tank for hydrochloric acid, how many years of service, please list the basis, thank you!
- According to the use of resin and hydrochloric acid concentration and temperature are different, 30% concentration 100 DEG C can be used for a long time, more than 25 years
- Q:What is the wall thickness of FRP vertical tanks?
- I am in the design of FRP cans, the main reference to the ASME standard calculation, HG20692 only as a process reference. I have a lot of my own calculation templates, covering all FRP containers, product design, here is not good, need further communication, please contact me.
- Q:To make a high quality FRP tank, is the hardware construction important to the quality?
- They are not lying are winding process, but the drum mold and the coil made out of the tank quality difference of several grades, or why only the strength of the manufacturers will be on the drum mold, because the drum made lining is the no formation of the uniform wall thickness of gas bubble, with pneumatic demoulding demoulding no damage to the lining, the lining is the most intact Guan Jian lock and barrier factors all corrosive substances to penetrate the layer structure.
- Q:Glass steel anti-corrosion tank glass steel coating thickness to detect initiation
- Probe to choose in the more smooth place, but also smear some oil, similar to the hospital to do B ultrasound. There is no data across the air.
- Q:My unit recently needs 3 large tanks for hydrochloric acid. The tank, which was made of fiberglass before, is of poor quality and cannot be used for three years
- In a few years, I think it's important for me to choose a good manufacturer, although I don't want to advertise for the manufacturer here, but considering the hydrochloric acid tank, if an accident occurs, it will be a fatal blow to the enterprise
- Q:What kind of industry does GRP storage tank belong to?
- According to the (storage or transportation) medium is made of epoxy furan resin, modified resin, polyester or phenolic resin as the binder, the high resin content corrosion impervious layer, lining layer, fiber winding layer and an outer protective layer composed of strengthening.
- Q:Can FRP tanks withstand industrial hydrochloric acid?
- Small to a few cubic meters, large to dozens of cubic meters, you can do.
- Q:Should I pay attention to those details when using FRP tanks?
- One of the measures to prevent leakage is to make the double wall oil storage tank and the inner surface of the tank glass fiber reinforced plastic oil resistant impermeable layer. As a concrete method, the prepared oil storage tank is placed in the tank of underground reinforced concrete oil tank, and the glass fiber reinforced plastic oil resisting impervious layer is made on the surface of the tank. Thus, when the oil leakage occurs in the glass fiber reinforced plastic storage tank and the pipeline, the oil is not leaked in the impermeable layer of the glass fiber reinforced plastic, and the pollution of the underground water resource is avoided.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
GRP Water Tank/ FRP Storage Tanks/ Fiberglass Reinforced Plastic Tank DN6000
- Ref Price:
-
$20.00 - 2,000.00
/ set
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
