Graphite Electode for Electric Arc Furnace
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 2 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Graphite Electrode for Electric Arc Furnace
Composite of Graphite Electrode for Electric Arc Furnace:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke
and widely used in the electric arc furnaces for production of alloy steels, metal and other
nonmetallic materials, etc.
The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm.
Applications of Graphite Electrode for Electric Arc Furnace:
It is used for the electric arc furnace steel making. (About 70-80% graphite electrode is used for steel making).
It is used for the submerged arc furnace, including melting iron alloy, pure silicon, yellow
phosphorus,matte, calcium carbide and so on.
It is used for the resistance furnace, such as the graphite making, melting glass, silicon carbide
making and so on.
Advantages of Graphite Electrode for Electric Arc Furnace:
low electric resistance
good electric and thermal conductivity
high oxidation resistance
high mechanical strength
high machining accuracy
greater resistance to thermal and mechanical shock
28 drums counter-flow calcining furnace
Auto-control dosing system
Germany Enrich kneading system
3500MT vertical tamping&horizontal extruding press
Auto-comtrol ring backing furnace
Germany Feist-incon 2nd Baking Kiln
High pressure imprgnation system
Acheson high power DC graphitizing furnace
Japan Nachi NC electrode machining line
America lngersoll NC electrode machine line
Graphite Electrode for Electric Arc Furnace Images
Specifications of Graphite Electrode for Electric Arc Furnace:
Item | Unit | Regular-power | Impregnated | ||||||
φ75- | φ150- | φ250- | φ350- | φ75- | φ250- | φ400- | |||
130 | 225 | 300 | 500 | 200 | 350 | 500 | |||
Specific Resistance (≤) | E | μ Ω·m | 8.5 | 9 | 9 | 9 | 8 | 8 | 8 |
N | 8 | 8 | 8 | 8 | 7.5 | 7.5 | 7.5 | ||
Bending Strength (≥) | E | MPa | 9.8 | 9.8 | 7.8 | 6.4 | 10 | 9 | 8 |
N | 13 | 13 | 13 | 13 | 15 | 15 | 15 | ||
Elastic Modulus (≤) | E | GPa | 9.3 | 9.3 | 9.3 | 9.3 | 12 | 12 | 12 |
N | 14 | 14 | 14 | 14 | 14 | 14 | 14 | ||
Bulk Density (≥) | E | g/cm3 | 1.58 | 1.52 | 1.52 | 1.52 | 1.58 | 1.58 | 1.58 |
N | 1.63 | 1.63 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | ||
C.T.E.(≤) | E | 10-6/°C | 2.9 | 2.9 | 2.9 | 2.9 | 2.7 | 2.7 | 2.7 |
(100-600°C) | |||||||||
| N | 2.7 | 2.7 | 2.8 | 2.8 | 2.5 | 2.5 | 2.5 | |
Ash(≤) |
| % | 0.5 | 0.5 | 0.5 | 0.5 | 0.3 | 0.3 | 0.3 |
FAQ of Graphite Electrode for Electric Arc Furnace
Q1:Are you a manufacture or trader?
A:Factory+trade(mainly factories,at the same time,we operates other related products).
Q2:Can we visit your factory?
A:Sure,welcome at any time,seeing is believing.
Q3:What's the MOQ of trial order?
A:No limit,We can offer the best suggestions and solutions according to your condition.
Q4:Is your company accept customization?
A:We have own factory and excellent technical team,and we accept OEM service.
Q5:How about your company's certification?
A:ISO9001 and Test Report,also we could apply other necessary certification.
Q6:How to slove the quality problems?
A:If the products are not confirmed to customer samples or have quality problems,our compay will be responsible to make compensation for it.
Q7:Can you offers samples?
A:Of coures,samples are free but freight paid by the buyers.
Q8:What is the service life of your products?
A:The service life of different bricks is unlike.It also depends on your using condition and method.
If you have any enquiry,please don't hesitate to contact us, we will provide our best products and services for you!!
- Q:The difference between graphite electrode and graphite rod
- Graphite rod for non metal products, as carbon arc gouging cutting process in an essential pre welding cutting supplies, is composed of carbon and graphite with appropriate adhesive, through the extrusion, the temperature of 2200 DEG C after baking rotary plating a layer made from copper, high temperature resistance, good electrical conductivity, is not easy fracture, suitable for metal cutting into required shape.
- Q:Why is the production of one ton of ultra high power graphite electrode requires 1.05 tons of coke?
- After calcined to eliminate ash and volatile part of the points in this process will be a lot of weight loss, in the process of crushing mixing in process of baking or graphite in high temperature heat treatment, another part of the impurities were excluded, so the raw material is higher than the rate of finished products.
- Q:I remember the more lively metal, the electron?
- C is a salt solution of copper metal because copper is first reduced to a single element on a graphite electrode.Moreover, the addition of dilute sulfuric acid has a H2 emission, then a H of the previous metal.
- Q:Which department in the steel plant needs graphite in large quantities?
- For steel and iron alloys, graphite electrodes are used, when powerful currents pass through electrodes into the melting zone of the electric furnace to produce an arcThe electric energy is converted into heat energy, and the temperature is increased to about 2000 degrees, so as to achieve the purpose of smelting or reaction. In addition, the electrolytic goldWhen the magnesium, aluminium and sodium are used, the anode of the electrolytic cell is also made of graphite electrode. The resistance furnace for carborundum is also made of graphite electrode as the burnerConductive material.
- Q:Is graphite flammable?Why do I bake pencil cores with a fever that doesn't burn?
- In anaerobic conditions, the ignition temperature is at least above 3000 degrees. There are many types of graphite, different types of ignition points, and the burning point of pyrolytic graphite...
- Q:What kind of asphalt is better for natural graphite coating?
- Main types of graphite electrode with petroleum coke and needle coke, coal tar pitch as binder, calcination, mixing, kneading, pressing, baking and graphitization, and made the processing machine, is a conductor in an electric arc furnace to form arc release electricity for heating and melting of the charge, according to the quality index level, can is divided into ordinary power, high power and ultra high power.
- Q:What are the factors that affect the electrode wear rate of machine tools?
- Effect of peak pulse current on electrode wear. The peak current has a great influence on electrode wear, but the curves are very different due to the different materials of the electrode and the workpiece. In the copper electrode machining steel, general peak current, electrode loss is also large, but also have a great relationship with the pulse width, so in practice, we should choose different peak current of different area according to the data processing technology of power supply and discharge pulse width, can make the processing speed is high, and the electrode loss small.
- Q:What's the purpose of the electrode material?When the electrolytic molten state of NaCl is said, what is the use of the graphite electrode and the iron electrode?
- The copper electrode used for finishing size of the copper electrode discharge speed is not fast but spent graphite electrode is relatively smallRequirements of the high surface, the appearance of products are copper electrode discharge processingThe iron electrode is not clear enough to be used
- Q:What is anodized graphite?
- Anodized graphite is mainly used for making brushes. The utility model has the advantages of good performance, high resistance coefficient and contact voltage, favorable for suppressing spark, and wide application range, and can be used for various types of motors and motors with more difficult commutation conditions.
- Q:Why is graphite a negative pole and copper is an anode?
- Graphite, as an electrode material, can conduct electricity, which belongs to an inert electrode. It only acts as a conductive agent, but does not participate in the electrolytic reaction process. So the anode is made, and copper is oxidized in the electrolysis of monovalent cations, so copper is used as the anode.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Graphite Electode for Electric Arc Furnace
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 2 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords