CFL T3 Cup Energy Saving Lamp
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 500 Pieces pc
- Supply Capability:
- 5000 Pieces per Day pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
CFL T3 Cup Energy Saving Lamp
1.High-efficiency,energy-saving,long life
2.Environmental protection,protect eyesight
3.Low-temperature,good color rendering
Specifications of CFL T3 Cup Energy Saving Lamp
1.high-brightness,low power consumption
2.environmental protection,high energy saving
3.safety and reliability,long life
5. high quality and competitive price
6. pure tri-phosphor powder & blender powder
7. Color rendering index:≥80Ra
Features of CFL T3 Cup Energy Saving Lamp:
1.adopt constant-current design
2. good size and fits most fixtures
3. High light output and excellent color rendering
4. More compact and elegant
5. High lumens,good light maintenace
6. With PBT plastic,which is fire-proofed
7. Low heat emission
Advantages:
1. Producing energy saving lamp with many years OEM experience
2.Quite strict raw material inspection and quality control system
3.Advanced production technology of compact fluorescent lamp
4.Energy saving lamp of excellent quality but competitive price
- Q:Are there any differences between fluorescent lamps and energy-saving lamps? What are the differences between them?
- Rare earth phosphors are mainly used in office, store and factory high performance fluorescent lamps. Since the middle of 80s, with the development of less expensive fluorescent phosphor containing terbium, the application of this energy-saving lamp has been increasing rapidly. In mid 90s, the international launch of the TMT2 straight tube fluorescent lamp, the diameter of only 7mm, power is 6W~13W, light efficiency is 621m/W.T5 straight tube type fluorescent tube diameter is 16mm, power 14W~35W, 28W fluorescent light up to 104m/W, life is more than 16000h. in new development of high power light type 55W~120W is suitable for outdoor lighting compact energy saving rare earth fluorescent lamp, light efficiency more than 801m/W.
- Q:What are the types of fluorescent lamps?
- Relationship between the diameter of fluorescent lamp tube and its electrical parameters:1, fluorescent tube, the smaller the diameter, the higher the light efficiency, the better power-saving effect2. The smaller the diameter of the fluorescent tube, the higher the ignition voltage of the glow lamp, the higher the technical performance requirements of the ballastThe diameter is larger than T8 (T8) fluorescent lamp starter ignition voltage is low. Compared with 220V, 50Hz AC, with starting ignition voltage less than 1/2 power supply voltage law. Can use inductive ballast, for starting and lighting operation.
- Q:Is the energy-saving lamp a fluorescent lamp?
- The three primary colors of energy-saving lamps, high efficiency energy-saving fluorescent lamp, also known as compact fluorescent lamps and integrated fluorescent lamp, refers to the fluorescent lamp and ballast (ballast) are combined into a whole lighting equipment, the effective life of eight thousand hours or more.
- Q:Maintenance and repair of fluorescent lamp
- Don't switch the lights too often. Too much lighting can cause premature darkening of both ends of the tube, which affects the power output of the tube, and it should be noted that the lights should be switched on for 5 to 15 minutes after the lights are turned off.
- Q:What is a fluorescent lamp? What are fluorescent lights?
- The traditional fluorescent lamp type fluorescent lamp and electrodeless fluorescent lamp, traditional fluorescent lamp is a low pressure mercury lamp, mercury vapor is the use of low pressure in the discharge process of ultraviolet radiation, so that the phosphors emit visible light emitting principle, so it belongs to low pressure arc discharge light source. The traditional fluorescent lamp is equipped with two filaments. The filament is coated with electronic emission materials, three yuan carbonate (barium carbonate, strontium carbonate and calcium carbonate), commonly known as electronic powder. The alternating filament acts as a cathode and anode under alternating voltage. The inner wall of the lamp tube is coated with phosphor powder. The tubes are filled with argon at 400Pa-500Pa pressure and a small amount of mercury. After discharge, the liquid mercury evaporates into mercury vapor at a pressure of 0.8 Pa. In the electric field, the mercury atoms continuously from the original state is excited into the excited state, then spontaneous transitions to the ground state, and the radiation wavelength of 253.7nm and 185nm (the peak value of ultraviolet wavelength is 253.7nm, total radiation energy 70-80%; peak wavelength is 185nm, accounting for about 10% of the total radiant energy), to the release of excess energy. The fluorescent powder absorbs ultraviolet radiation and emits visible light. Fluorescent powder is different, the light is also different, that is, fluorescent lamps can be made white and various colors reasons.
- Q:What's the difference between an energy-saving fluorescent lamp and a LED light?
- The semiconductor wafer consists of two parts,One part is the P type semiconductor, in which the hole dominates,The other end is the N type semiconductor, which is mainly electronic here.
- Q:Why can fluorescent lamps emit various colors?
- The fluorescent lamp uses this principle. The fluorescent lamp itself sends out ultraviolet light, and the fluorescent powder coated on the tube wall absorbs ultraviolet lightAfter the line is changed into visible light, the phosphor is different and the color of the light is also different
- Q:How to adjust light in fluorescent lamp
- Fluorescent light dimming can also extend the life of the light source, dimming to 90%, doubling the life of the light source; dimming to 80%; the light source life is extended two times; dimming to 50%; the light source life is extended ten times. Although this is a theoretical value, but shows that fluorescent lamp dimming can also reduce the frequency of replacement of the light source, the light source in the unit of time to reduce the amount of change a lot, it also has its positive significance for energy saving and emission reduction.
We can make all kinds of specially sized lamps according to clients' needs. Our products are sold to clients in all parts of our country, Southeast Asia, the Middle East, South America, Eastern Europe, etc.We warmly welcome customers from all over the world to contact us and establish business relationships for a better future.
1. Manufacturer Overview |
|
|---|---|
| Location | Zhejiang,China (Mainland) |
| Year Established | 2011 |
| Annual Output Value | US$1 Million - US$2.5 Million |
| Main Markets | 50.00% Western Europe 20.00% Eastern Europe 10.00% Mid East 10.00% Southeast Asia 10.00% South America |
| Company Certifications | CE-LVD; CE-EMC1 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Shanghai, Ningbo |
| Export Percentage | 41% - 50% |
| No.of Employees in Trade Department | Above 50 People |
| Language Spoken: | English, Chinese |
| b)Factory Information | |
| Factory Size: | 3,000-5,000 square meters |
| No. of Production Lines | |
| Contract Manufacturing | OEM Service Offered |
| Product Price Range | |
Send your message to us
CFL T3 Cup Energy Saving Lamp
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 500 Pieces pc
- Supply Capability:
- 5000 Pieces per Day pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
