Aluminum conductor rail
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
We are the largest aluminum profilemanufacture in
Material | Alloy Aluminum 6063,6061,6005,6082 or customer nominated |
Temper | T3, T4, T5, T6 and other |
Surface | Anodize, electrophoresis, powder coating, PVDF coating, etc. |
Colour | Any colour based on Standard Germany RAL Mark |
Length | Not more than 16 meters |
Good Package | Inner plastic film /outside carton/wooden pallets |
Payment Method | T/T, L/C, etc |
Delivery Time | Normally 2-4 weeks, Delivery time can be consulted. |
Press Machine | 500-12500 tons all together 93 press lines. |
Fabrication | 1. Furniture 2. Drilling; 3. Bending; 4. Cutting; 5. etc. |
Certificate | ISO/TS 16949,DNV,IRIS,CCS,AFA,etc. |
Dies | 1. Using our dies, no fee; |
2. Using customer drawing, opening dies, usually about 5~50 tons then the dies cost can be refunded. | |
3. Die cost is negotiable base on the order quantity | |
Capability | Annual output 800,000 tons |
- Q:What is the tensile strength of the 6063T5 aluminum tube and what is the elongation rate?
- The tensile strength of 6063T4 aluminium tubes is about 150. The elongation rate is about 10%. T6's around 230. The elongation rate is about 8%As it were, you can Q me: 88099379 (Shanghai Xuan Sheng)
- Q:How do aluminum pipes compare to carbon steel pipes in terms of cost?
- Aluminum pipes generally tend to be more expensive than carbon steel pipes. This is primarily due to the higher cost of manufacturing aluminum as compared to carbon steel. Additionally, the production process for aluminum pipes involves more complex techniques such as extrusion or welding, which further adds to the overall cost. On the other hand, carbon steel pipes are typically less expensive due to the abundance of raw materials and the simpler manufacturing processes involved. However, it is important to note that the cost comparison may vary depending on factors such as pipe size, grade, and market conditions.
- Q:How many kilograms does the copper pipe withstand? How many kilograms does the aluminum pipe withstand?
- The allowable stress for TP2 copper tubes is specified as S=41.2MPa (6000Psi).The allowable stress of aluminum pipe should be checked
- Q:Is the Ronshen refrigerator made of brass tubes or made of aluminium tubes?!
- In general, the condenser in the box is straight seam welded steel pipe, and the evaporator is made of copper tube and aluminium pipe. I hope it works for you.
- Q:Are aluminum pipes lightweight?
- Yes, aluminum pipes are lightweight.
- Q:The aluminum extrusion seam? Is there a big difference between the two?
- Seamless aluminum tube production process: reverse through the core (hole) to form seamless pipeThe production process of aluminum tube seam: conventional tubes is generally used for combination die extrusion, which is produced by extrusion, is welded, the welding seam is automatically in high temperature.
- Q:Do I need special work permit for cutting aluminum tubes?
- A special job job scope: 1, electrical operation 2, metal welding cutting operation 3, lifting machinery (including elevator), operating 4 motor vehicles in 5, driving high erection and high-altitude hanging industry 6, refrigeration task 7, boiler operation (including water quality test) 8, pressure vessel operation 9, blasting operations 10, mine operations (including gas inspection) 11.
- Q:Are aluminum pipes suitable for potable water tanks?
- Yes, aluminum pipes are suitable for potable water tanks. Aluminum is a corrosion-resistant and lightweight material that does not leach harmful substances into the water, making it a safe and reliable choice for potable water storage.
- Q:How to repair the surface defects of aluminum pipe
- Third, the pipe is used to do it, the thickness of a pipe length measurement and recording, in general use will be selected according to the use of its wall thickness specifications and the length of the specifications, if found to have stiff head tubes should be timely marked when used to head to stiff it uses the slow speed, and high temperature.Fourth, after the completion of the expansion pipe, aluminum pipe to the appearance check to see whether the pipe surface defects, if flawed, allowing him to eliminate the timely elimination of defects if too much, not to be able to restore to enter the furnace re grinding clean.When the fifth tubes are heated, the thickness of the top three branch material shall be measured. After the expansion is completed, a measurement shall be carried out, and the expansion speed and temperature shall be adjusted according to the changes of these two measurements.The whole round repair of aluminum tubes is the most common repair in the industry, with the following methods for repairing the pits or flattening
- Q:Are aluminum pipes suitable for outdoor applications?
- Yes, aluminum pipes are suitable for outdoor applications. Aluminum is a lightweight and durable material that has excellent corrosion resistance, which makes it ideal for outdoor use. It can withstand harsh weather conditions, including rain, snow, and sunlight, without deteriorating or rusting. Additionally, aluminum pipes have a long lifespan and require minimal maintenance, making them a cost-effective choice for outdoor applications such as irrigation systems, outdoor furniture, handrails, and structural supports.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aluminum conductor rail
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords