Greenhouse Shading Fabric

Hot Products

LDPE Nonwoven Geomembrane

HDPE Geomembrane Waterproof Material

Reinforced Geomembrane

First Class electrolytic manganese metal (EMM) 99.7% in low price

PET Long Filament Nonwoven Geotextile

Geotextile Fabric

HDPE Nonwoven Geomembrane

Staple Fiber Nonwoven Geotextile good burying

Polyester Nonwoven Geotextile Fabric

Long Fiber Nonwoven Geotextile

FAQ

Large area ground concrete cushion seam Why is the separation of joints generally concrete

hird, the relevant parts Different types of rigid waterproof layer separation spacing in addition to meet the calculation needs, but also in the following parts set sub-grid joints. 1. The deformation of the roof structure sensitive parts; 2. Roof and roof drainage direction changes; 3. The junction of the waterproofing layer and the protruding roof structure; 4. Under normal circumstances, each bay load-bearing walls should be set sub-grid seam. 5. Between the waterproof layer and the load-bearing or non-load-bearing parapet or gable should be set sub-grid joints, and in the node structure for proper treatment.

Why calculate the amount of time to count a lot of cushion ah

In the building construction refers to the base is located below the cushion sometimes also served as grassroots. With the cushion, in the above work is convenient, clean, especially the mold, bar reinforced, pouring concrete and other processes, will not be affected by the basic earth pollution. Set the place where the cushion is generally based, floor, roof (slope) and so on.

What is the relationship between the cushion and the ring beam?

Cushion is plain concrete or asphalt concrete (for groundwater soil corrosive strong site). Is located below the ground, in order to prevent the foundation or the concrete beam pouring when the excessive loss of water caused by defects set. The purpose is to ensure the quality of concrete, increase the durability of underground components

Maintenance time of the cushion on the roof of the building

According to the "concrete structure construction quality acceptance criteria" provides: Concrete should be poured within 12h after the completion of the concrete to be covered, and moisturizing conservation;

Is the raft cushion waterproofing full of the cushion?

Base cushion waterproofing is not contact with the soil (Ying water) to prevent water into the cushion, but in the cushion and the base of the bottom of the contact, in fact, is the basis of the bottom of the waterproof. The general basis of the foundation, the bar base is not necessary to do, like a raft in the basement, it is necessary to prevent the water from dipping into the basement (so the basement design may have to do anti-floating calculations).

How to build a fine stone concrete cushion?

Reduce ground cracking, plus steel mesh. Reinforced mesh, should be placed in the middle of the concrete, because the protective layer of concrete thick Fang generally only 5CM thickness, so the middle is the best.

The roof cushion is waterproof on the slope roof

and the formation of the ice dam will lead to roof water, water will find the path into the house.

Is foam concrete suitable for use as a cushion?

And then through the foaming machine pumping system for cast-in-place construction or mold forming, the formation of natural conservation with a large number of closed pores of the new lightweight insulation materials.