Display Stands

Hot Products

C Glass Woven Roving 360grs

C Glass Woven Roving Fabric 600grs

C Glass Woven Roving 600gsm For FRP Application

E Fiber Glass Woven Roving Fabrics

High Quality Fiberglass Woven Roving

E Glass Woven Roving 27grs

C-glass Woven Roving with Best Price and Top Quality

E-Glass Fiber Woven Roving for hand lay-up -1250mm

E Glass Woven Roving 800grs

E-Glass Woven Roving Combo Mat- ESM

FAQ

nan

waterproof. structure of the antenna is different from the conventional vertical antenna, but the principle is the same. They all are sealed.

nan

The excellent resin infiltration and permeability: Glass, in general, is hard and fragile. The warp and weft density is decided by yarn structure and texture. It is suitable for all kinds of spray gun and fiber conveying system. Due to its super strength, it can be used for producing packaging sheet and sports equipment. Twistless roving need to be soaked into resin paste with high content of pigment. The requirement that chopped?strand should be used to enhance thermoplastic?plastics is suitable for alkali free glass fiber.

nan

If grc was shaped by injection, glass fiber chopped yarn will be fine; if it was shaped by hands, alkali resistant fiber glass with mesh of 1cm * 1cm will be fine.

nan

The outer layer is made of glass fiber twistless roving and its inner layer is filled with special refractory, thermal insulation and expanding materials, which can expand in high temperature and solidified so as to form a sealing layer for the purpose of preventing fire spreading.

nan

It is a kind of boron silicate glass with corrosion protection. It also can used as chemical filter. As a reinforcing material of glass fiber, it has the following characteristics. It is alleged that it also has the potential as glass fiber reinforced materials with 86000MPa elastic modulus. It is upgraded alkali free glass fiber for the requirements of environmental protection. It belongs to a sodium calcium silicate glass containing boron or no-boron and high alkali glass fiber (over 13% sodium oxidation, the absorption of impact energy is very good, but it is very important). After processing, glass fiber can be divided into non-alkali glass fiber ( 0% ~ 2% sodium oxidation). Quartz sand belongs to sodium calcium silicate glass with good heat resistance. (1) with high tensile strength, it can be fused into a small glass beads under high temperature and also can used for the production of reinforced materials. (3) the elastic limit is large and the tensile strength is high. (7) good machinability, it is mainly used for enhancing the properity of cement. It also can be used for enhancing asphalt roofing. Its main component are silica and it is a typical sodium silicate glass so as to reduce environmental pollution. It also be widely used for the production of glass fiber. (11) It is not easy to burn with high strength. Its disadvantage is that it is easy to be eroded by inorganic acid. Its strength is greatly increased with high flexibility. Glass fiber is mainly used for electrical insulating materials, manufacture of reinforced plastic or reinforced rubber, electrical insulating materials and heat or thermal insulation materials and so on.

nan

Glass fiber extruding machine set can be used to produce different shapes of glass fiber reinforced plastics in different shapes, which can be formed by the oven traction machine oil pump station and so on.

nan

High temperature. When you store it, you need to pay attention to moisture proof and dust. Glass fiber roving has no expiration date.

nan

Corrosion can not happen. Glass steel bridge use alkali glass fiber roving and its fabric as reinforcement material, welding or screwing connection, with the glass steel life for more than 50 years. Using unsaturated resin as matrix material, plastic colorant, glass steel bridge uses vinyl chloride (UPVC) resin as the main raw material. In fact, the material made for cable tray have something to do with the actual project. Glass steel belongs to high-quality composite materials, plus a proportion of the stabilizer, oil and other corrosive media, then it has antiseptic function and special filler. generally, plastic steel has 15-30years life. It is not very good for acid and salt, and it is not very ideal material for extrusion molding, corrosion protection and so on. Plastic tray has a price advantage, but the strength is not so good . After adding other mineral filler, long life, and then cured by heating, extruding into various sections of the hollow section processing, steel is steel profiles and the main chemical composition is PVC.