1 2 Aluminum Plate Weight

Hot Products

Cast Aluminum Elbow Casting and Machining Weight 2 kg to85kg

FAQ

What are the auxiliary parts of the general hydraulic valve?

You are asking about the auxiliary parts of the hydraulic valve? Or the auxiliary parts of the hydraulic station? Hydraulic valve there are two of the most common installation, a plate fixed on the valve block (), he is at least several fixed screws and handwheel or plug, sealing ring, second, steward, plastic (with link), such as manual reversing valve, that he must be to have a handle and sealing ring, valve core. Anyway, no matter what valve, seal ring, valve core, these two are more than that, The auxiliary parts of the hydraulic station, that is the liquid level meter, the pressure gauge, the thermometer, the oil tank, the oil filter and so on, these things make up.

What does the hydraulic system do?

For hydraulic chuck, hydraulic stern, hydraulic turret, provide steady pressure. A complete hydraulic system consists of five parts: the power component, the execution element, the control element, the non-piece and the hydraulic oil.

How to ensure the operating speed of the hydraulic actuator is not changed by the load.

You don't need the speed control valve for the variable pump! I don't know if your system is complex and complicated, and it's best to attach a picture. If you need to install the speed control valve, note that the import and export is wrong.

Hydraulic force parts, slow feed, quick return. The oil tubing is the opposite

That's not the traffic problem to the cylinder! There are no throttle valves or pressure valves on the cylinder system, and you can see whether the flow is small or the back pressure is too high...

What are the main components of the hydraulic system

Power unit, control unit, execution unit, test, attachment The power unit is the pump motor or the accumulator The control unit is the valve The execution unit is the oil cylinder and the motor Tests are all kinds of pressure gauges, thermometers, sensors, etc The attachment is the line

What is the function of the constant pressure holding hydraulic actuator?

Control element is mainly composed of valve system, mainly used as energy storage components and actuators in the middle of the connection, and close action given hydraulic pulse signal, to control the operating element.

What is a high-end hydraulic component

A complete hydraulic system consists of five parts: the power component, the actuator, the control component, the auxiliary element and the hydraulic oil. Power hydraulic element The role of the component is to convert the mechanical energy of the original motive into the liquid pressure energy, which is the oil pump in the hydraulic system, which provides the power to the whole hydraulic system. The hydraulic pump is structured in the form of gear pumps, vane pumps and plunger pumps

What is a hydraulic system?

Can deliver "size are the same in all directions from a liquid. The piston of the pressure is also equal to P. If the cross-sectional area of the piston is S2, pressure P on the large piston upward pressure generated by the F2 = PxS2 The sectional area is a multiple of the cross-sectional area of the small piston. From the type, add a small force on the small piston, has got a lot of force on the piston, for this hydraulic press is used to suppress plywood, oil, extract weight, forging steel, etc.