Insulation and Waterproof tile backer board CNBM Group
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Insulation & waterproofing solutions - CMAX Insulation and Waterproof tile backer board CNBM Group
Product name Insulation and Waterproof tile backer board CNBM Group:
CMAX board (as known as construction board, tile backer board, insulation backer board, waterproof backer board, wet room backer board, XPS board.)
Product structure Insulation and Waterproof tile backer board CNBM Group:
CMAX boards are made of high-performance waterproof extruded polystyrene (XPS Board), it has a 0.75mm coating on either side comprising a glassfiber mesh embedded in a polymer cement mortar.
Outstanding characteristics Insulation and Waterproof tile backer board CNBM Group:
Both insulation and waterproof.
Product appearance Insulation and Waterproof tile backer board CNBM Group:
The boards have straight edges. The color of the surface is grey and the core material is light blue.
Working temperature range Insulation and Waterproof tile backer board CNBM Group:
50 to +80 °C
Standard dimensions and weight Insulation and Waterproof tile backer board CNBM Group:
Thickness(mm) | Weight(kg/m²) | Length by width(mm*mm) |
6 | 2,7 | 1200 x 600 |
10 | 2,9 | 1250 x 600 |
12 | 3,0 | 2500 x 600 |
20 | 3.1 | 2500 x 600 |
30 | 3,3 | 2500 x 600 |
50 | 4,2 | 2500 x 600 |
The board has the following tolerances:thickness:± 2mm width:± 2mm length:± 3mm.
Reaction to Fire:
The boards are classified as class E according to EN 13501-1. When the boards are covered with tiles, their fire performance should comply with local construction laws and regulations.
Effect on indoor environment Insulation and Waterproof tile backer board CNBM Group:
CMAX board has been assessed as not emitting any particles, gases or radiation that may have a negative effect on the indoor climate or to have any significant effect on health.
Environmental declaration Insulation and Waterproof tile backer board CNBM Group:
The product does not contain any substances on the observation list of dangerous substances published by the national environmental authorities.
Main applications:
Used as a watertight layer on walls and floors in houses, hotels and other wet areas such as bathroom, shower room.
Other applications:
Other places to be insulated and waterproofed.
Applications:
1. as a watertight layer on walls and floors in wet rooms and bathrooms.
2. as an insulation layer in under floor heating to avoid heat loss.
3. as partition walls in wood or steel frames.
4. substitute for gypsum board and fiber cement board; insulation and waterproofing; lighter so that more easily to install.
5. As enclosures for bathtubs, water pipes, etc.
6,Can very easily and fast formed to be small shelves, washbasins, shower benches and soap boxes.
7. Combining with CMAX curved/shapeable boards, kinds of decorative models can be made with your infinite creativity.
Fixing:
Choose a way to fix CMAX board according to the substrate to be fixed. Normally, using modified tile adhesive for solid concrete wall/floor and strengthened by mechanical fixings when necessary while only using mechanical fixings for wood and steel frames.
Reinforcement:
1. Dry areas: reinforce all joints between boards, floors and walls by 125px or 250px wide self-adhesive tape.
2. Wet areas: reinforce by suitable waterproof tape.
Waterproof strengthen:
1. Strengthening all joints between boards, floors, walls and mechanical fixings placements by suitable waterproof tape.
2. Strengthening joints between walls, outside corners and inside corners by special corners.
3. Sealing pipe holes with special waterproof tape.
4. Strengthening once again by waterproof glue, liquid tanking membrane, tanking membrane paint, etc. when necessary.
Coating of panels:
Should always be covered by ceramic tiles, mosaics or other equivalent non-fireproof materials after installation.
FAQ:
1.
Q: Are you a manufacturer of insulation materials?
A: Yes. ourselves manufacturer of thermal insulation board.
2.
Q: What is the seaport near your plants?
A: The nearest port is Shanghai Port, there are about 100km from the port to our plant in Shanghai.
3.
Q: What is annual production capacity of your main products?
A: 200,000 piecs per month.
4.
Q: Do you have your own brands? And what are they.
A: Yes. we are a fortune 500 company, our brand is "CMAX"
5.
Q: Is sample available for testing?
A: Yes. The sample is free.
We do OEM as well. Welcome to make an enquiry and we will give you quick response in 12 hours!
- Q:Why extruded board (XPS board) is the best insulation board material
- Should belong to the template and support system. Full scaffolding is generally used for single-storey building, hall and other high-rise, large building between the top of the building decoration. By the pole, cross bar, bracing, scissors and other components.
- Q:Steel structure rock wool sandwich wall panel what the amount of this set
- Indoor insulation is generally made of "polystyrene foam board", the general thickness is 2..3 cm thick, you can understand clearly, in the end is how thick the foam board (when playing screw holes, can be found is thick thick foam board) The First play expansion bolts, do insulation, can say the details of the point. There is that you can use .7 inside the expansion of the screw, to Fu Fu Huang Peng, You can also use welding, then a long screw, is also very simple.
- Q:Roofing the top of the extruded polystyrene insulation board generally how much weight ah?
- The bar spacing is called 'step distance', 1.2 ~ 1..1.8m, no minimum spacing, maximum 1.8m. Pole spacing 1..1..1.55m, no minimum spacing, maximum 1.55m. See JGJ130 Haifa Fenzhuang Curcuma Gufeng Koufukai -2011 "Construction Construction Fastener Steel Scaffolding Safety Technical Specification" 'Structural Requirements'.
- Q:What is the difference between extruded polystyrene board and XPS insulation board?
- Is a normal phenomenon, frost in the frost when the frost, and a temperature probe.
- Q:Steel plant wall plug color steel tile, the glass glass inside the glass, hanging in color steel, how construction? How is the cost associated with a single sandwich panel?
- More than 24 meters need to use cantilevered scaffolding, and the spacing of not more than 20 meters
- Q:Polystyrene foam hard insulation board will not be harmful to the human body, right?
- Online under ah ~ ~! A few days ago I have a ~ ~!
- Q:How is the flame and combustible defined by the naked eye? I burn the B1 level and B2 level XPS board is different? Question added: detection time is longer, can quickly and intuitively identified? More
- Mainly for insulation to reduce heat loss. So use a good insulation material insulation. Hope it helps you.
- Q:25 thick extruded polystyrene plastic insulation board how many kilograms per cubic meter
- 2 fastener type steel pipe stent construction must be prepared before the construction program
- Q:How to distinguish between good and bad insulation board insulation board
- Which is good to know how to save the cheek version of the wedge is not very simple can be conclusive. The use of the environment on the impact of different materials, expensive reasons can not be used as a good reference for things, such as the general situation Coke than boiled water expensive, but when the medicine, you say cola good or boiled water is good. 2 kinds of material strength is almost, aluminum good point, toughness is much better PP plastic, but only at room temperature, once the temperature is too high or the bottom, the plastic will be easy to break. Now the plastic process is very developed if the plastic stent is used with some new advanced technology that can improve some of the plastic defects to achieve the metal can not reach the firmness. It is best to buy some, practice to compare it
- Q:I set up in October 2008, the production of XPS board - that is, with the extinction of polystyrene foam plastic plate, is an energy-saving environmental protection materials. Consult experts: I can enjoy the relevant tax incentives?
- Think of the safety data directory to compare the trouble to compare JGJ59-2011 check the information bar
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Insulation and Waterproof tile backer board CNBM Group
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
