FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment DN4000
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment
In the FRP .with high tensile strength, the fiberglass plays the role of reinforcement whiles the wear-resistance and pressure –resistance synthetic resin is used for bonding the fiber as the basic materials. Putting together, they commonly play the role of being in finished form and load carrier.
Feature of FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment
The wall structure of the FRP pipe is normally consisting of two parts:
Structure layer: make the continuous glass fiber woven of which is cross winded according to the design angle as the reinforcing frame. Make the synthetic resin as the bonding basic materials. Among them, the weight of fiberglass occupied about 65-70% weight of resin about 30-35%. In order to strengthen the structural stiffness, the resin and silicon sand paste could be added in the middle layer of fiberglass filament winding layer.
Specification of FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment
u 2.5” Precision injected threads opening available in 8”~16” diameter tanks
u 4” precision injected threads opening available in 18”~36” diameter tanks
u 6” Flange opening available in 42”~80” diameter tanks
u 8”~18” diameter tanks available top opening only
u 21”~80” diameter tanks available top and bottom opening
u Tripod bases available in sizes of 21”~80” diameter tanks
u Optional side opening is available
Materials
u The liner layer is PE (polyethylene) materials for 8”~36” diameter tanks
u The liner layer is FRP (fiber reinforced plastic) for 42”~80” diameter tanks
Working condition
u Operating pressure: 0.6Mpa (100psi)
u Bursting Pressure: 1.8Mpa (300psi)
u Testing pressure: 0.9Mpa (150psi)
u Working temperature: below 50 centigrade
Application
Pre RO, Ion Exchange, Water softener, water filtration, House hold water filtration, Food and beverage, water storage
Opening
u 2.5”~4” UN threads ABS opening;
u 6” Flange FRP;
u other customized manway and side flange
Advantage
u Good corrosion resistance
u High mechanical strength at low specific gravity
u Good resistance to weathering
u Light weight
u Good insulating qualities
u Provide less maintenance & repairs down time
u Easy installation
FAQ
1. How is the package?
Solid Seaworthy plywood Box Package with Steel Belt. Save space as much as possible for container loading
2. What's the guarantee, in case the water tank breaks down?
The water tank has one year s guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts will be replaced for free if the problems are caused by quality fault.
3. How about the documents after shipment?
After shipment, we ll send all original documents to you by DHL, including Packing List.Commercial Invoice, B/L, and other certificates as required by clients.
PRODUCTION
FACTORY
PACAKGE
- Q:The thickness of the coating of glass steel tank initiations how detection
- During the test, a distance not less than 20mm the measured point edge or corner of the inner member. The probe shall be in vertical contact with the surface of the measuring point. The contact time should be kept from 1s to 2S, and the measured values displayed by the instrument shall be read and printed or recorded.
- Q:What are the 4 layers of FRP tanks?
- Sub lining: to protect the lining role, in case the lining burst, it will not cause product leakage, double insurance.
- Q:What are the manufacturing processes of FRP tanks?
- In order to increase the strength and stiffness of the tank and to improve the surface performance of the tank, the longitudinal lining must be wrapped around the qualified lining surface. The thickness of the wrapping layer is determined by the design of the internal pressure, determined by the diameter, the pressure and the safety factor.
- Q:What kind of material can be used to store the dilute hydrochloric acid containing toluene?
- What kind of material can be used to store the dilute hydrochloric acid containing toluene?
- Q:Glass fiber (resin) storage tank for hydrochloric acid, how many years of service, please list the basis, thank you!
- According to the use of resin and hydrochloric acid concentration and temperature are different, 30% concentration 100 DEG C can be used for a long time, more than 25 years
- Q:What are the features of FRP tanks?
- Tightness is good, never leak, the traditional septic tank is very easy to leak, easy to pollute the ground water, from the floor is generally the smallest, not less than 5 meters. The Chinese style glass septic tank has advanced technology, integrated production, no cracks and no leakage. It can completely avoid the contamination of ground water by the traditional septic tanks and affect the safety of buildings.
- Q:What is the wall thickness of FRP vertical tanks?
- That's the industry standard. It's perfectly OK to calculate in that way, and the calculated thickness is generally too thick.
- Q:What matters should be paid attention to when cleaning and maintaining FRP tanks?
- To prevent the equipment from hitting the tank wall, use a ladder, metal pieces equal to the tank wall contact part, add soft pad to protect the inner wall from being split and bruised.
- Q:Why leakage occurs during the use of FRP tanks?
- Poor production, including lining defects, inappropriate selection, low strength and so on
- Q:The production process of FRP tanks
- At present, the world's most used glass steel storage tank production methods have the following four kinds.Hand paste method: the main use countries are Norway, Japan, Britain, Denmark and so on.Jet method: the main use countries are Sweden, the United States, Norway and so on.Molding method: the main use countries, such as germany.RTM method (resin transfer molding): the main use countries are Europe and the United States, japan.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment DN4000
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords